I'd recomend this upgrade for anyone having second thoughts about their investement, although this firmware is not listed in their library of downloads, it can be found rather easily by viewing the postings in the general forum.
Cheers
Inovate 'Code 8" Issues/ Solution
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Inovate 'Code 8" Issues/ Solution
Just in case others have had trouble with trouble flash code "8" and interruption of afr readings with the inovate Bosch windband sensor and system, I did recently and figured I'd lost my wide band sensor. I was well on my way to stressing about that and the cost of replacement parts, but happened to visit the Invoate forums and noted a pattern of like issues and a recomended firmware upgrade to 1.20 (I believe I had been @ 1.0 from original installation) Did that this morning and presto back in business.
I'd recomend this upgrade for anyone having second thoughts about their investement, although this firmware is not listed in their library of downloads, it can be found rather easily by viewing the postings in the general forum.
Cheers
I'd recomend this upgrade for anyone having second thoughts about their investement, although this firmware is not listed in their library of downloads, it can be found rather easily by viewing the postings in the general forum.
Cheers