launch control in TS

[isaacson06]

ok is it somthing TS has ?? im running a microsquirt v3 i really need this launch control to get the bike out of the hole thanks.

[LT401Vette]

TS allows you to change settings on your MicroSquirt, but the functionality that it is capable of is up to the firmware you are running on it.
There are firmwares that have launch control for the MicroSquirt.

[isaacson06]

how and where do i get a firmware with launch control?? thanks for the help

[isaacson06]

ok so i jumped on your site and downloaded the lastest firmware (im not on my tuning laptop ) so i downloaded that and TS loaded firmware 1.1.1 and it has everything im needing like air shifting settings and anti-lag all the goods now what im needing to know if i load 1.1.1 on my tuning laptop and open my tune up and load it to my bike do i have to retune alot of it?? Another question and the launch control and air sifter i see you can use a tableswitch or whatever the other things are so how to i wire it in?? thanks again

[LT401Vette]

Actually the firmware needs to be loaded on the controller itself. It isn't really related to TunerStudio beyond TunerStudio needs to be configured for the firmware you actually have loaded on the controller.
If you downloaded version 1.1.1, that sounds like you may have downloaded MS3 firmware. That won't work on a MicroSquirt, you need to use MS2 firmwares with a MicroSquirt. For Launch Control on a MicroSquirt you can use MS2 Extra that you will find at msextra.com

[isaacson06]

Thanks a lot for your help I'll post in another section to see how to wire it in. Thanks again