Not firing injectors while cranking
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Not firing injectors while cranking
Injector test mode works Ok and injector are firing as supposed. I´m getting steady 230 rmp while cranking but injectors aren´t firing at all. I have spark on both plugs. Maybe setup problem ?
- Attachments
-
- 2013-05-07_21.32.57.msq
- (30.2 KiB) Downloaded 190 times
Re: Not firing injectors while cranking
fuelpump output stays off after prime pulse. No signal while cranking.
Re: Not firing injectors while cranking
Problem solved. New firmware version v3.78 did the trick... who knows 