newbie with edis problems!
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
newbie with edis problems!
Ok here is the deal, I have a turbocharged 4.6 mustang that I am running the edis setup on. When I first turn the key on the injectors will prime, but when I spin it over it will not fire the injectors. The injectors work fine in test mode. Pin 31 is grounded. I'm also getting 180 rpm while starting. I have been thinking of uploading new software as well. Any help wpuld be appreciated!