i`m trying to install an ms module on gsxr1100.
VR sensor produces around 200mv, but microsquirt see rotation only when i short r25.
i`ve tryed to replace it with 4,7kOhm, 2.2 kOhm and even 500Ohm, but still see nothing on the tooth logger
what can it be?
VR sensor issue
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.