Hi all,
I am curently working on fuel injecting a 2 stroke kick start only bike, and so far my plan is to use a gm hei module to give me instant spark and hopefully sync, my question is can I run a 12 tooth wheel for more accuracy and a single tooth wheel( to trigger my hei)
will this work to get my first revolution spark without sync to light off my "prime pulse" and hopefully everything will then sync up and run? please help as this is keeping me up a night and my wife is getting sick of it... Thanks Blaine
hei + crank position
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: hei + crank position
That hybrid approach could work; keep in mind that you will want the 1 tooth trigger to come in at your lowest amount of spark advance you'd run.
Matt Cramer at DIY Autotune
