one wide band EGO per cylinder

gullwing · Post by **gullwing** » Wed Mar 29, 2006 7:07 pm

I am new to this forum and feel like I have earned an engineering degree with what I have learned so far. A couple of questions I wanted to ask. Does anyone see if having a seperate MAP and EGO for every cylinder is the way to go? or are we able to identify the individual signals well enough that this will not be necessary? I am in the planning phase of building a Desoto hemi with a MS-II and EDIS-8 and will use a routing board to maintain sequential (thats the plan so far)

KGB · Post by **KGB** » Wed Mar 29, 2006 8:18 pm

Not enough input for an 8 cylinder, and I don't think there is code to take advantage of individual cylinder O2 to do cylinder fuel trim

Skiericski · Post by **Skiericski** » Wed Mar 29, 2006 9:00 pm

KGB wrote:Not enough input for an 8 cylinder, and I don't think there is code to take advantage of individual cylinder O2 to do cylinder fuel trim

Not yet, of course, but the GPIO and router boards should enable most of what he's talking about.