access board -- jim stem
Moderators: grippo2, Bruce Bowling, grippo
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
access board -- jim stem
trying to do some prep work/planning to install the sequencer when it is avail. will the access board be avail when sequencer is ready for prime time? is there a way to use jim stem for testing/set up on the bench? i am currently running port injection on a stroked dodge 440/496. thks ==sheriff==
-
Peter Florance
- Helpful Squirter
- Posts: 92
- Joined: Fri Apr 02, 2004 7:40 pm
- Location: Virginia Beach, VA
- Contact:
Re: access board -- jim stem
I just adapted a usquirt harness to a DB37 and it works fine on JimStim. Hoping the access board is released though.
Peter Florance - PF Tuning http://www.pftuning.com
81 BMW Euro 528i ESP Car MS3 or MS2Sequencer V1.04 (depending on the day)
60-2 Wheel LS2 Coils, Low Z Inj
81 BMW Euro 528i ESP Car MS3 or MS2Sequencer V1.04 (depending on the day)
60-2 Wheel LS2 Coils, Low Z Inj