Hello,
We have the MicrSquirt setup and we are not getting any readings to TunerStudio Lite?
We are using this MicroSquirt:
http://www.diyautotune.com/catalog/micr ... p-519.html
With this Firmware Version:
MS2 Rev 3.83000
RPM readings
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: RPM readings
Please post a copy of your MSQ and what you are using for RPM input.
Matt Cramer at DIY Autotune
