Air Density Correction
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
TV Super Bee
- MegaSquirt Newbie
- Posts: 11
- Joined: Sat Jul 22, 2006 10:54 am
- Location: San Ramon, CA, USA
- Contact:
Air Density Correction
My AFR is perfect if my engine temp is below 190deg F. Above this temp my EGO goes lean. In the Advanced settings of Megatune this can be adjusted % up/down. The manuel does not say which way to adjust for more fuel at a given temp. In the morning and evening the AFR is perfect, during the day ambient temp can rise above 100deg F. this in turn makes my CLT & IAT rise leaning out my engine. I live in California, at sea level. The Megamanual only describes these sensors and does not address how they function with Megatune. Please help!
383 EFI dual 65mm throttle bodies, 36lb injectors
"AS SEEN ON TV"
http://www.moparalley.org/gallery/hollywood
-
TV Super Bee
- MegaSquirt Newbie
- Posts: 11
- Joined: Sat Jul 22, 2006 10:54 am
- Location: San Ramon, CA, USA
- Contact:
383 EFI dual 65mm throttle bodies, 36lb injectors
"AS SEEN ON TV"
http://www.moparalley.org/gallery/hollywood